Icom Canada
 
Icom Canada - Home Icom Canada - Contact Us Icom Canada - Site Map
   
Icom Canada - Avionics Icom Canada - Avionics
 
 
 

IC-2700H - Dual Band VHF/UHF Mobile Transceiver

 

Quick Specs:
2m/440 MHz dual band mobile transceiver
RX/TX: 144-148 MHz; 440-450 MHz
Output power: 50 W VHF; 35 W UHF
Modes: FM
Receiver sensitivity: 0.16 µV (FM, 12 dB SINAD)
CTCSS encode standard, CTCSS decode (tone squelch) optiona

 
Detailed Specifications:

GENERAL

  • Frequency Coverage:
    VHF: 144.00-148.00 MHz
    UHF: 440.00-450.00 MHz
  • Tuning step increment: 5, 10, 12.5, 20, 25, 30 or 50 kHz
  • Number of memory channels: 126 (100 regular, 2 call, 12 scratch pads and 12 scan edges)
  • Mode: FM
  • Antenna Impedance: 50 ohms (nominal)
  • Power Supply Requirement: 13.8 V DC+/-15%
  • Current Drain (at 13.8 V DC):
    VHF:
    Transmit (high): 12.0 A
    Receive (max. audio): 1.8 A ; Receive (squelched):1.2 A
    UHF:
    Transmit (high): 11.5 A
    Receive (max. audio): 1.8 A ; Receive (squelched):1.2 A
  • Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
  • Dimensions (projections not included): 140(W) x 40(H) x 177(D) mm, 5.5(W) x 1.6(H) x 7.0 (D) in
  • Weight: 1.45 kg; 3.2 lb.

TRANSMITTER

  • Output Power (selectable):
    VHF: 50 W; 10 W; 5 W
    UHF: 35 W; 10 W; 5 W
  • Modulation System: Variable reactance frequency modulation
  • Max. Frequency Deviation: ±5.0 kHz
  • Spurious Emissions: Less than -60 dB
  • Microphone Impedance: 600 ohms

RECEIVER

  • Receive system: Double-conversion superheterodyne
  • Intermediate frequencies:
    VHF: 1st 41.8 MHz; 2nd 455 kHz
    UHF: 1st 42.25 MHz; 2nd 455 kHz
  • Sensitivity: Less than 0.16 µV for 12 dB SINAD
  • Squelch sensitivity: Less than 0.13 µV (at threshold)
  • Selectivity: More than 15 kHz/-6 dB; Less than 30 dB/-60 dB
  • Spurious response rejection: More than 60 dB
  • Audio output power: More than 2.0 W at 10% distortion with an 8 ohms load.
  • Audio output impedance: 4-8 ohms

IC-2700H Options

INTERNAL UNITS

  • UT-66 VOICE SYNTHESIZER UNIT: A clear, electronically generated voice announces the operating frequency in English or Japanese.
  • UT-84 TONE SQUELCH UNIT: Provides pocket beep, tone squelch and tone scan functions and ensures quiet stand-by. Can also be used as a subaudible tone encoder.

EXTERNAL SPEAKERS

  • SP-7 EXTERNAL SPEAKER: Large speaker suitable for base station operation. Input impedance: 8 ohms; Max. input power: 5 W.
  • SP-10 EXTERNAL SPEAKER: Compact design provides excellent audio in your vehicle. Input impedance: 8 ohms; Max. input power: 5 W.
  • SP-12 EXTERNAL SPEAKER: Slim-type speaker for mobile operation. Easily installed on a sun visor, dashboard, etc. Input impedance: 8 ohms; Max. input power: 3 W.

CABLES

  • OPC-346 DC POWER CABLE: Supplied with the IC-2700H. Cable length: 3 m (9.8 ft); capacity: 20 A.
  • OPC-347 DC POWER CABLE: Cable length: 7 m (23.0 ft); capacity: 20 A.
  • OPC-438/439: SEPARATION KITS: OPC-438: 3.5 m (11.5 ft); OPC-439: 7.0 m (23.0 ft)
  • OPC-440 MICROPHONE EXTENSION CABLE: Extends the microphone cable. Cable length: 5.0 m (16.4 ft)
  • OPC-441 SPEAKER EXTENSION CABLE: Extends the speaker cable. Has 2 band connectors. Cable length: 5.0 m (16.4 ft)

MICROPHONES

  • HM-90/A WIRELESS MICROPHONE: Infrared, full remote control microphone. Wired remote control is also possible.
  • HM-92/A REMOTE CONTROL MICROPHONE: Same as the supplied one.

OTHER OPTIONS

  • AH-32 144/430(440) MHz DUAL BAND ANTENNA: Frequency range: 144-148/430-450 MHz. Max. input power: 150 W.
  • AHB-32 TRUNK MOUNT ANTENNA BASE: Trunk mount with a coaxial cable for the AH-32.
  • BC-96 MICROPHONE HOLDER: Holds the optional HM-90/A WIRELESS MICROPHONE body in a convenient place and supplies power to the charging circuit of the HM-90/A. Both the CP-13/L CIGARETTE LIGHTER CABLE and OPC-288/L DC POWER CABLE can be used as optional power source connections for the BC-96.
  • EX-1513 INFRARED SUB RECEIVER: Increases the front panel's sensitivity to control signals from the HM-90/A and provides accurate reception of signals when the front panel cannot receive infrared signals directly (eg. when operating from the backseat of a vehicle).
  • MB-17A MOBILE MOUNTING BRACKET: One-touch bracket. Transceiver body is easily attached and removed.
  • MB-26 MOBILE MOUNTING BRACKET: Same as the supplied one.
  • MB-58 REMOTE CONTROLLER BRACKET: Mounts the remote controller in a convenient location when separate from the main body.
  • IC-PS30 DC POWER SUPPLY: Output voltage:13.8 V; Max. current drain: 25 A. Equipped with 3 output connectors.
 
 
Home | Products | Dealer List | News | About Us | Career | Warranty | Services | Archive | Contact Us | Authorised Dealer | Site Map
 
Copyright © Icom Canada